Jump to content

flavtfan

Members
  • Posts

    377
  • Joined

  • Last visited

Everything posted by flavtfan

  1. he's putting an FCI, Power Commander 5, and a Barker's dual exhaust on it. I rode it down the street, it's got a ton of torque that's for sure....pretty different from my YFZ. It also had a twist throttle that I don't think I liked very much since i'm not used to it I guess.
  2. sounds good......it might only be 2 of us now due to some family issues that popped up for the others, but we should be out there. Look for a white box truck with a black stripe down the middle. my friend just bought a 2008 raptor special edition so he's pretty anxious to try it out. he decided to get a 4 stroke after his banshee burned so much gas down at glamis. That way he can ride longer since everyone else was on 4 strokes.
  3. We are leaving Thursday night now, staying until about mid day sunday. we normally park right around 6.
  4. Selling a set of ITP sand stars on ITP wheels that came off a YFZ 450(so they have yamaha lug pattern). These tires were used 1 time, look brand new, still have the wear knobs all over them and rubber is still soft with no cuts or chunks missing. Wheels are in perfect condition. New, each wheel w/tire would run 120 a piece...I'm selling for 140.00 for the set. Great for duning!! 850-527-1396. Located in North Las Vegas. Had them sold but buyer did not come through
  5. ah yeah that's in my bag I take with me to where I ride. As for what I have on me at all times, small adjustable wrench and mini tire pump in my camelback, decent sized piece of safety wire, and the standard tool kit that fits under my seat that came with the quad, extra plug
  6. Selling a set of ITP sand stars on ITP wheels that came off a YFZ 450(so they have yamaha lug pattern). These tires were used 1 time, look brand new, still have the wear knobs all over them and rubber is still soft with no cuts or chunks missing. Wheels are in perfect condition. New, each wheel w/tire would run 120 a piece...I'm selling for 140.00 for the set. Great for duning!! 850-527-1396. Located in North Las Vegas
  7. JB Weld, a metric socket/wrench set up to 19mm...a socket for my front sprocket with 1/2 drive ratchet, breaker bar, 1 6in extention, 1 3in extension, deep well socket for my lug nuts, safety wire, compressed air can, plyers, adjustable wrench, dikes, and electrical tape for my YFZ 450. Also have an assortment of bolts/nuts, wire connectors, spark plugs, jets, seals.
  8. Thanks Capt for checking, I actually dropped them off at proline today so I could get the quickest turnaround for my trip next week. Sorry about that Capt, I will edit my post, I went back to my email and it was actually vegas powder coating that quoted me for 200, I never got a reply back from State of the Art from their email contact information on their website. I should have emailed dewayne at operations instead of the sales dept. I'll look into them when it's time to do my swingarm. I have a friend that is wanting a banshee frame powder coated....you think he would do a decent price on that?
  9. vegas powder coating was the place that wanted 200 dollars to do a pair of 8X8 ATV wheels. Proline is 80 for the pair and Surface Effects was 100 in case anyone was wondering.
  10. my buddy has a blue yfz with hipers and blue rings....looks sweet. i used to like the polished look but like the maintenance of black wheels, soon my handlebars and swingarm will be black too
  11. Cool thanks....I like 25 per wheel myself
  12. haha, i just got a quote back from vegas powder coating that i submitted yesterday for 200 dollars haha....they've lost their mind
  13. sounds good guys, I'll check them both out for pricing and turn around time. Rap, I talked to a lot of people including fullerton and skat trak and the 21X12X8 6 paddle is what pretty much all of them recommended for a stock to mildly built yfz for the best all around duning and better speed so we will see. I'm going to stick with my 20X10X10 7 paddle though as spares or if I just do not like the new ones. Looks wise I really like the look of the 10 inch wheel vs the 8 inch so we'll see if the 8's grow on me. I'm also sending the head and carb off for port work around May, right now I just have the big 3 done with the FCI, Pipe, and Cammod and it really hauls a$$. I'm going with a CP 12:75:1 piston, port/polish, and a 42.5 taperbore carb.
  14. Anyone know of a good powder coater in Las Vegas that can do my new set of Douglas wheels? I got a set of 8X8 wheels and need them semi gloss black instead of chrome. Also, what should I expect to pay to have 2 wheels coated? I'm moving from my 20X10X10 7 paddle extremes to 21X12X8 6 paddle haulers
  15. 4 of us are heading out MLK weekend.....is it normally pretty busy out there? I think we are leaving friday night and staying through monday...coming back tuesday morning.
  16. yeah, i'm thinking our next trip to glamis we'll be going a little faster....none of us knew where we were going there haha.
  17. This is only my 4th time at Dumont and my first at Glamis....it's been fun so far and hopefully more fun to come in 2013!! Sorry, it's 9:45 minutes long.....it was a lot to get in, I have a TON of Glamis video from my 4 day trip.
  18. ah, yeah there was a truck pulling a rail back from comp....mis-read the post.
  19. My buddy and I want to try armagosa soon...within the next couple of weeks. We want to try out different places for sure. I know we are trying to set up a trip MLK day to glamis or ogilby...we were going there presidents day but I have family coming in.
×
×
  • Create New...