Raptor0206 Posted October 26, 2010 Share Posted October 26, 2010 So i picked up a 110cc jap quad for my GF's son and its got a blown head gasket, does anyone in town here sell gasket/parts for these things? the motor is honda based Quote Link to comment Share on other sites More sharing options...
JoeDuner Posted October 27, 2010 Share Posted October 27, 2010 If you have a Raptor, that's a Japanese quad as well, where would u take it to ? Quote Link to comment Share on other sites More sharing options...
Sand_YFZ Posted October 27, 2010 Share Posted October 27, 2010 Those engines are super easy to work on.Here is a link from ebay... http://cgi.ebay.com/ebaymotors/110cc-head-base-gasket-fit-1P52FMH-series-engine-_W0QQcmdZViewItemQQhashZitem1e5c206ad7QQitemZ130394647255QQptZMotorsQ5fATVQ5fPartsQ5fAccessories If you are slightly mechanically inclined you can do it yourself. The cam stays in the head//You take those 4 bolts off on the top, Take off the cam gear, and remove the head..Replace the gasket, line up the marks on the fly wheel with the marks on the case, line up the mark on the cam gear with the mark on the head, and torque everything back down. Here is a video from youtube.... Watch this video and you will see how easy it is..I was surprised how simple it is..I put a bigbore on my daughters quad. Quote Link to comment Share on other sites More sharing options...
SandBurro Posted October 27, 2010 Share Posted October 27, 2010 So i picked up a 110cc jap quad for my GF's son and its got a blown head gasket, does anyone in town here sell gasket/parts for these things? the motor is honda based If its a honda based engine on a China quad, i would have to make a good guess of it being the GY6 engine, which was a scooter engine used by Honda in the 80's and they discontinued it so everyone started copying it. You can get a new engine for around 200 bucks. They will run pretty good, just watch all the rubber parts on them from the spark plug wire to all the bushings, etc.. I would replace everything that is rubber little by little. That is the only issue i have had with my older daughters 150 Hibird quad, runs like a champ still after 2 years and they ride that thing alot. Also, get some extra chains or buy a good one, because the cheap ones stretch really easy beyond adjustment. Hope this helps you. Quote Link to comment Share on other sites More sharing options...
Raptor0206 Posted October 28, 2010 Author Share Posted October 28, 2010 Joe, i know the raptor is a jap quad. The reason i said jap is because its one of the cheep quads u see for 500-1000 bucks. I already have the motor apart, the gasket it blown into the timing chain grove, ordered a new gasket off ebay for 8 bucks and guess i will see if i can get it to fire up before i go ahead and pop 200 for a new motor. Thanks for the video helps a little, for some reason my timing marks are backwards of that motor? Quote Link to comment Share on other sites More sharing options...
seadoojumper Posted December 7, 2010 Share Posted December 7, 2010 Those quads are from china, not japan. fiero brothers motorsports is the only place in town who will work on em. (702) 434-5602 · 2255 Marion Dr, #160, Las Vegas, NV 89115 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.