MAXDOUT Posted December 8, 2010 Share Posted December 8, 2010 Just finished up another toolbox / work bench combo at my buddies house. The garage had no cabinets or anything when he bought the house. So we installed white cabinets to match the inside cabinets and framed in a workbench. Had the diamond plate cut with a waterjet and then installed it and a custom galvinized top with back splash. All is left is move a couple outlets around,a little drywall pickup and paint. Quote Link to comment Share on other sites More sharing options...
Jakster884 Posted December 8, 2010 Share Posted December 8, 2010 Looks good. I can use one of those once I get back into a House. I am sure he will be loving this now everything will be organized nicely. Quote Link to comment Share on other sites More sharing options...
EY3BA11 Posted December 8, 2010 Share Posted December 8, 2010 hey tyler where are you getting the cabinets and stuff from? I want to add a wall of uppers but on the cheap.. Quote Link to comment Share on other sites More sharing options...
MAXDOUT Posted December 8, 2010 Author Share Posted December 8, 2010 Mostly Home Depot or Lowes. We did one with custom cabinets ordered with the home. But usually the local stores have good prices on them. The uppers in this photo are from Home Depot. They in turn matched the cabinets I installed on the side wall. Quote Link to comment Share on other sites More sharing options...
EY3BA11 Posted December 8, 2010 Share Posted December 8, 2010 i got some of those white ones from lowes taht were 100 bucks per upper was just hoping to find something a little sturdier that press board crap busted on me when puttin one together.. ohh well. Might just have to go that route.. was hoping to find someone remodeling their kitchen and tossing old cabinets kinda thing. Quote Link to comment Share on other sites More sharing options...
MAXDOUT Posted December 9, 2010 Author Share Posted December 9, 2010 (edited) I'll keep my eye out for you. We sturdy up the cabinets by putting 1/4 inch plywood over that crappy cardboard backer they give you. And we throw the piece of crap feet they give you as well. We mount them to the wall and resting on the stem wall. Finish off the underside with a toe-kick cut on the angle / slope of the garage floor. Much cleaner. Edited December 9, 2010 by MAXDOUT Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.